Molybdenum News

Tungsten News
What Are Functions of Molybdenum Disulfide in Fluoroplastics Industry? 214

What are applications of plastic in daily life? 1,General purpose plastics: large output, wide application, good formability and low price. Widely used in daily necessities, packaging materials and small mechanical parts. Its output accounts for about 90% of the world’s total plastics, also known as bulk plastics, most of which are thermoplastics. 2,Special plastics: plastics with special properties in a certain aspect used in special environments, also known as dingal plastics, such as medical plastics, magnetically conductive plastics, thermally conductive…

Tungsten News
Molybdenum Copper Heat Sinks for Gallium Arsenide in Defense Industries 238

Controlling heat dissipation in sealed equipment housing electronic components is a major challenge in the electronics industry. Molybdenum copper and tungsten copper composite materials are engineered through wrought powder technology to provide higher thermal conductivity and highly controllable thermal expansion, so as to meet the requirements of the applications. Key applications for molybdenum copper materials include heat sink materials, bases, substrates, heat sinks, machined components and material blanks. Among them, molybdenum copper heat sinks are widely used in microwave carriers,…

Tungsten News
Molybdenum Copper Base Plates Are Used for Electronic Packaging Thanks to its Good CTE 231

Electronic packaging technology refers to the manufacturing process in which one or more chips are packaged and connected into circuit devices. As an important interface connecting chips and systems, and an important part of devices and electrical appliances, it has gradually integrated into chip manufacturing technology and system integration technology from providing mechanical support, protection and electrical and thermal connection dings for chips in the early days. With the development trend of miniaturization and high integration of electronic products, it…

Tungsten News
TZM Plate or TZM Sheet for Structural Furnace Components 263

Metal sheet/plate is a thin sheet/plate made from different materials of tungsten, tungsten alloys, molybdenum and molybdenum alloys. The sheet could be formed by hot rolling procedures and is polished further with different finishes depending on the applications. TZM has several valuable properties such as high strength, creep resistance, hardness and low vapor pressure in high temperature environments. Sheets/plates made of TZM alloy thus have low expansion coefficient, excellent heat and corrosion resistance and good machinability. Compared with pure molybdenum…

Tungsten News
TZM Alloys for Radiation Shielding and Heat Exchangers 285

TZM, also known as titanium zirconium molybdenum, is a mature molybdenum alloy. The main advantage of using it is that it can well support applications where high strength and creep resistance are highly required. It is a stable metal and is not affected by temperature reduction and works well without weakening or softening. Alloying facilitates the vacuum arc casting process by which complete melting and mixing of molybdenum oxide and alloy is accomplished. Therefore, with the help of the two…

Tungsten News
Energy Saving SiC Heating Elements and MoSi2 Elements for Electric Furnace 285

There are several types of heating elements available for industrial heating. Generally speaking, metallic heating elements such as nichrome wire (Ni-Cr) are commonly used in lower temperature ranges (up to 1100°C), and MoSi2 elements are often used in high-temperature ranges (1200-1900°C). Silicon carbide (SiC) heating elements cover between the two at temperatures up to 1600°C. Silicon carbide is a ceramic material with relatively high electrical conductivity when compared to other ceramics. The uniqueness of this material is that it has…

Tungsten News
Silicon Carbide Rods Are Used in Various Types of Electric Industrial Furnaces Thanks to its Characteristics 260

As a new type of electric heating element, silicon carbide rods are widely used in various types of electric industrial furnaces. The main composition of this rod is silicon carbide that is an artificial abrasive. Generally, silicon carbide is divided into black silicon carbide and green silicon carbide. The later one owns greater purity. In addition to being used in the abrasive industry, silicon carbide is used in the electrical industry to produce silicon carbide electric heating elements – silicon…

Tungsten News
What Are Strengthening Mechanisms of TZM Alloy 270

TZM is molybdenum’s prime alloy and is an alloy of titanium, zirconium and carbon. This alloy is the most popular materials among various kinds of molybdenum metal and molybdenum alloys. With better high temperature resistance, greater strength, it can be used as a mold for high-temperature heat processing of metals. In addition, to be applied in the hot runner system as nuzzle tip, it can maintain the plastic melting state and helps the formation of plastic products. For the strengthening…

Tungsten News
How to Choose Sintering Methods for Titanium-Zirconium-Molybdenum (TZM) Alloy? 245

The earliest produced in the industry is titanium-zirconium-molybdenum (TZM) alloy, which is a molybdenum alloy containing 0.4%-0.55% titanium, 0.06%-0.12% zirconium and 0.01%-0.04% carbon. The total amount of alloying element does not exceed 1%. There are two main sintering methods for titanium-zirconium-molybdenum alloy: hydrogen protection sintering and vacuum sintering as following: 1.Hydrogen protection sintering: the product is sintered under the protection of hydrogen. During the process, due to the reduction effect of hydrogen, the oxides in the molybdenum powder will be…

Tungsten News
Cu/Mo/Cu Heat Sink (CMC) for Radio Frequency and Lead Frames 446

High power electronics and circuits generate a lot of heat during operation. The heat sink materials help to eliminate the heat of the chip, transfer it to other media, and maintain the stable operation of the chip. Tungsten-copper and molybdenum-copper alloy are the most common heat sink materials, which are a kind of heat sink substrate commonly used for high airtight packaging such as CPU, IC, solid microwave tube. This material has a thermal expansion coefficient and high thermal conductivity…

1 … 5 6 7 8